anko KB-932E3, Руководство пользователя

Страница: 4 / 6


Ensure that the steam control (D) is on OFF position

Connect the plug to a suitable power outlet.

Turn the temperature dial ( I ) to a setting within the
steam range

The indicator lamp (H) will light up. The light will turn
off as soon as the selected temperature is reached.

Turn on the steam control (D) to ECO or and
begin ironing.

In case to smooth a stubborn wrinkle, press and hold
the steam control (D) at position to give a
powerful steam.
Dry Ironing

Position the iron vertically on its stand on a suitable
flat stable surface.

Ensure that the steam control (D) is on OFF position

Connect the plug to a suitable power outlet.

Turn the temperature dial ( I ) to a desired setting

The indicator lamp (H) will light up. The light will turn
off as soon as the selected temperature is reached.

Now dry ironing can begin.
Using the spray button

Press the spray button a couple of times to moisten
the garment. Before spraying make sure that there is
enough water in the water tank.
NOTE : Do not spray water on silk.
Using the steam shot button

Press the steam shot button to instantly provide a
powerful burst of steam to eliminate stubborn
wrinkles. Steam shot can be activated when
temperature setting is in the steam range.

The steam shot button can also be applied when
holding the iron in a vertical position. This is useful
for removing creases from hung clothes, curtains,
etc.
ATTENTION: To protect against burns or injury to
persons, do not iron or steam fabrics while being worn
on the body. Do not direct steam towards the body
when ironing.
After ironing

After use, turn the temperature dial ( I ) to MIN and
disconnect the iron from mains power outlet.

Let the iron cool down and empty the water tank.
CLEANING AND MAINTENANCE
Unplug the iron from mains power and allow it to cool
down completely before cleaning and storing.
Cleaning

Clean the upper part of iron with a damp cloth. If
necessary, use a mild detergent.

Do not use alcohol, acetone, benzene, scourging
cleaning agents, etc., to clean the iron. Do not use
hard brushes or metallic objects.

Remove any deposits on the soleplate with a damp
cloth. To avoid scratching the finishing, never use a
metallic pad to clean the soleplate, and never place
the iron on a rough surface.

To remove synthetic residue from the soleplate, iron
over an old cotton rag in high setting.

Always store the emptied iron horizontally on a
stable surface with a cloth protecting the soleplate.
Self-clean function
The self-cleaning function should be used on a regular
basis, depending on usage and the hardness of water
used.
WARNING: Never pour white vinegar or any liquid
cleaners into the water tank!

Fill the water tank. Refer to OPERATION: Filling the
water tank.

Position the iron vertically on its stand on a suitable
surface.

Ensure that the steam control (D) is in OFF position.

Connect the plug to a suitable mains power outlet.

Set to maximum ironing temperature.

Once the soleplate temperature is reached, unplug
the iron from mains power.

Hold the iron over a sink (away from your body),
press and hold the steam control (D) at “CALC
CLEAN” position. Boiling water and steam will now
emit from the holes in soleplate.

Carefully shake the iron forwards and backwards to
allow any scale and other deposits being expelled
with the boiling water and the steam.

Release the CALC CLEAN button when the water tank
is empty.

Plug the appliance into a mains power outlet socket,
set a temperature and leave in operation for at least
two minutes to dry the soleplate.

Unplug the iron and let the iron cool down fully.