anko JJB-301, Руководство пользователя

Страница: 5 / 20

Page 5 of 20
DO NOT use near sinks, baths or showers containing water or near running
water.
DO NOT
use in swimming pools, etc. containing water.
Always disconnect the plug from wall socket, let cool completely and release
the pressure before removing the water fill cap.
It is highly recommended to disconnect the plug from wall socket and let cool
before changing the accessories.
Do not use this appliance if it has been dropped or any part of the appliance
(including cord or plug) has been damaged.
Use only accessories recommended or supplied by an authorised service
centre or qualified dealer. The use of accessories not intended for use with
this appliance may cause injuries to the user or damage to the appliance.
Do not place this unit on other appliances, on uneven surfaces or where it
could be subject to heat sources (e.g. radiators or stoves), direct sunlight,
excessive dust
This Appliance should not be placed near a hot gas or electrical burner or
placed in a heated oven.
Do not operate this appliance underneath or near flammable or combustible
materials (e.g. curtains, petrol, fuels, etc.).
The appliance should always be switched off before connecting or
disconnecting from the power supply. Never pull the cord to disconnect the
plug from the wall socket.
Any type of servicing, apart from ordinary cleaning, must be carried out by an
authorised service centre or qualified dealer. There are no user serviceable
parts in this appliance.
If this appliance is to be used by a third party, please supply the instruction
manual with it.
Always disconnect the plug from wall socket, let cool and release all internal
pressure before removing the Water Fill Cap when filling the appliance with
water, or pouring the remaining water out. Note : Squeeze the steam trigger
to release the pressure. Never open the cap to release pressure as Injury
may result.