Page 6 of 8
Insert the batteries inside the battery compartment matching polarity icons with
those next to each battery compartment and then refit the cover, push down to
clip in place and screw securely.
Note
: Do not over tighten the screw.
Battery Type: “1.5V 2 x AA”
To prevent corrosion, remove the batteries if the fan will not be used over a
lengthy period.
3.2 Fill with Water
To fill with water, turn the fan upside down.
Unscrew the filler cap anticlockwise.
Fill with clean cold water to just below the opening, then refit the filler cap and
tighten securely.
Do Not
fill with any other liquid other than fresh clean cold water.
3.3 Water Spray Trigger
To create the water mist, grasp the bottle of the fan and place your index finger
on the trigger.
Squeeze (pump) the trigger continuously until a fine mist of spray is produced.
