anko HEG74, Руководство пользователя

Страница: 8 / 12

Page 8 of 12
4.2 On/Off Button
•
Plug the product into a standard electrical outlet and switch on. The Red Indicator
light will illuminate above the On / Off Button indicating Power is supplied to the
unit.
•
Press the ON / OFF button to turn the fan on.
•
Once the fan is ON, you may proceed to set the following functions.
• To Turn Off, press the “ON/OFF” button again.
4.3 Speed Button
•
Each press of the “SPEED” button advances the Speed setting as indicted by the
lights on the control panel.
Note, “L” indicates Low speed, “M” indicates Medium speed and “H” indicates
Maximum speed.
• Continue to press the “SPEED” button to cycle around.
4.4 Oscillating (OSC) Button
• To activate the oscillation function for widespread breeze distribution, press the
Oscillating button. (“OSC” on the remote control)
•
The Tower will rotate side to side and the light next to the Oscillating button on the
fan control panel will illuminate.
• To turn off the oscillation function, press the Oscillating button (“OSC” on the
remote control) again when it reaches the desired position.
4.5 Timer Button
This function sets the duration of operation before the fan automatically turns OFF.
Pressing the “Timer” button will increase the time of operation in 0.5 hour increments to
a maximum of 7.5 hours.
The total time selected is indicated by the display illuminating at 0.5H, 1H, 0.5 + 1H, 2H,
0.5 + 2H, 1H + 2H, 0.5H + 1H + 2H and so on up until all the lights are illuminated adding
up to 7.5H.
Note: Pressing the button once more after 0.5H + 1H + 2H + 4H lights are illuminated (at
the same time) will cycle around and cancel the auto off function. (no timer lights
illuminated).
The timer will count down until the time has expired, then the fan will turn off
automatically.
To cancel the timer, either press the “OFF” button, which will turn the fan off as well, or
continue to press the “TIMER” button until it cycles back around to where no timer lights
are illuminated