Page 8 of 12
3 Assembly
3.1 Safety Grille and Blade
Your Pedestal Fan has been boxed unassembled to minimise packaging waste.
Each part is designed to fit together and be disassembled easily for cleaning or storage.
To assemble the safety grille and blade assembly, take the motor assembly and place
the rear safety grille into position ensuring the safety grille fits onto the locating lugs. If
this is done correctly, the rear safety grille’s carry handle will be at the top.
Fix the rear safety grille into position by replacing the locking nut tightly by hand
Do not over tighten the locking nut.
Place the Fan Blade onto the motor spindle.
Note
: The Motor shaft has a flat on one side and the hole in the centre of the fan blade
also has a flat on one side. Ensure the two flats are aligned to enable the fan blade to
be pushed on all the way.
Fix the blade into place by gently hand tightening the spinner
anticlockwise
onto the
end of the motor spindle. The spinner nut is self-tightening when the motor starts so do
not force it, just nip it up.
Spinner Nut
Locking Nut
Rotate clockwise to tighten
Locating Lug
Locating Lugs
