
HOW TO USE THE CLIPPER
•
Select an appropriate length trimming guide to match the desired length of
hair to remain after the cut. The trimming guides are numbered and marked
with 3mm, 6mm, 9mm, 12mm, 16mm, 18mm and 25mm.
•
Hold comb with teeth up, slide the attachment firmly onto the bottom clipper
blade.
•
Use the longest comb guide to start trimming. You can always use a closer
trimming guide later if you want a closer cut.
•
The hair clipper has a taper lever located at the left side. The lever adds
versatility by allowing you to gradually change the closeness of your cut
without need for a trimming guide.
•
When the lever is in the uppermost
position, the blades will give you the
closest cut and leave the hair very short.
Pushing the lever downward gradually to
increase the cutting length.
WARNING:
Switch off the device before replacing or changing the attachments
NOTES:
The hair to be dressed must be dry.
NOTES:
The cutting length may deviate depending on the cutting angle. Please
start with a comb attachment with a longer cutting length and then, in the
course of cutting process, use shorter cutting lengths step by step
.
BEFORE CUTTING HAIR
•
Inspect the clipper and make sure there is no excessive oil on the cutting
blades prior ot use. Any excessive oil should be wiped off to prevent it from
getting on your kin.
•
Place the cape around the neck of the person whose hair is being trimmed
or cut.
•
This person should be seated so that the top of their head is at your eye
level.
•
Comb the hair as it is normally styled.
•
Comb out all knots and tangles.
•
Hold the hair clipper in the palm of one hand and with your thumb resting
firmly on the top of the hair clipper to give better control.
•
Ensure the hair is dry. Hair clippers perform best with dry hair, making it
easier to see how much hair is being cut.