Page 6 of 12
3 Assembly
3.1 Tripod
Your Fan has been boxed unassembled to minimise packaging waste. Each part is
designed to fit together and be disassembled easily for cleaning or storage.
•
First, lay the Tripod Hub assembly on the floor.
•
Remove the three Nut and Bolts.
•
Tip up so that the underneath of the base is facing the ceiling.
•
Take one of the legs and slide it into the Tripod hub. Take note of the orientation of
the leg end. The chamfered edge must be on top as shown.
•
Line up the holes and fit the bolt all the way through.
•
Fit the nut to the protruding end of the bolt and using a spanner and Philips head
screw driver, tighten the nut.
•
Repeat for the other two legs.
1
2
3
4
5
To open out the legs, grasp a leg whilst holding the hub
firmly and swing the leg out until it locks in place.
CAUTION: Take care not to pinch your hand or any other
object in the hinged components.
Keep children away whilst opening the legs.
