ankoproducts.com
- 2 -
®
1.0 SAFETY
WARNING:
Failure to follow the instructions in this manual may result in serious injury or death.
WARNING:
Risk of electric shock. This pump has been rated for indoor use only.
WARNING:
Risk of electric shock. Connect only to a grounding type receptacle protected by a
ground-fault circuit interrupter (GFCI). Contact qualified electrician if you cannot verify that the
receptacle is protected by a GFCI and that your installation meets local electrical codes.
WARNING:
Risk of electrical shock. Always make sure the voltage on the pump data plate matches
the installation voltage before plugging the pump into a wall outlet or hooking up to an electrical
supply.
WARNING:
Risk of electrical shock. Always disconnect the power to the pump prior to conducting
and maintenance or repairs.
WARNING:
Risk of chemical exposure. Always wear protective clothing, including gloves and safety
eye protection, when working on or near this pump.
WARNING:
Risk of chemical exposure. Always depressurize system and drain chemicals prior to
installation or maintenance.
WARNING:
Risk of fire or explosion. Do not pump flammable liquids.
WARNING:
Risk of injury.
Severe pinching of fingers can occur while installing and removing the
tubing. Caution must be used to keep fingers away from rotating parts.
2.0 SPECIFICATIONS
General Specifications
Pump Head
A302
Speed Adjustment (Variable Speed Models)
5% to 100%
Run Time Adjustment (Cycle Timer Models)
0% to 100%
Motor Type
Brushless DC
Duty Cycle
Continuous
Tubing Accepted
Anko Premium Class
Tubing Bores Accepted
1/4", 3/16” & 1/8”
Operating Voltage
100-240 50/60Hz
Plug Type
NEMA 5-15P
Max Working Pressure
25 psi
Compliance
UL778; FCC Part 15b Class A
