1
IMPORTANT SAFEGUARDS
Before using the electrical appliance, basic safety precautions should always be followed
including the following:
1. Read all instructions.
2. Make sure that the outlet voltage corresponds to the stated on the rating label of the
mixer.
3. If the supply cord is damaged, it must be replaced by a qualified electrical person in
order to avoid a hazard or the product must be disposed.
4.
IMPORTANT! Do not leave mixer unattended while it is operating.
5. Do not let cord hang over edge of table or counter or hot surface.
6. To protect against risk of electrical shock, do not put mixer or power cord in water or
other liquid. This may cause personal injury or damage to the product.
7. Avoid contacting with moving parts. Keep hands, clothing, as well as spatulas and other
utensils away from beaters during operation to reduce the risk of injury to persons,
and/or damage to the mixer.
8. Close supervision is necessary when your appliance is being used near children or
infirm persons.
9. This appliance is not intended for used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliances by a
person responsible for their safety.
10. Children should be supervised to ensure that they do not play with the appliance.
11. Switch OFF the appliance and disconnect from main supply before changing
accessories or approaching parts that move in use. Make sure the mixer has stopped
completely.
12. Do not place the appliance on or near a hot gas or on a heated oven.
13. Never pull out beater/dough hook/whisk when the appliance is in operation.
14.
IMPOTANT! Unplug from mains power outlet while not in use, before putting on
or taking off parts, and before cleaning.
15. Do not operate the appliance for other than its intended use.
16. Do not use outdoors.
17. Do not wash any parts / accessories in a dishwasher.
18. CAUTION: To avoid a hazard due to inadvertent resetting of the thermal
cut-out circuit, this appliance must not be supplied through an external switching
device, such as a timer, or connected to a circuit that is regularly switched ON and
OFF by the utility.