Page 14 of 24
7.2 Total Filter Blockage / Air Flow Blockage
The vacuum cleaner is fitted with a sensor which detects if the filter is totally
blocked or if there is a total air flow blockage.
If the filter becomes totally blocked, or if there is a total air flow blockage i, the
vacuum cleaner will turn off and a Red indicator light will blink on and off.
Refer to the “Cleaning the Filter” section in this manual on how to clean or
replace the main filter.
7.3 Battery Over Temperature
The vacuum cleaner is fitted with a temperature sensor which detects if the
battery is too hot for charging, or gets too hot while charging.
For example, if the vacuum cleaner has been used on Turbo Mode for the full
duration of the battery charge, due to the high current draw of the motor, the
battery will get hot.
This is quite normal; however, it is not good to recharge a battery which is hot
so to prevent damage to the battery, the vacuum cleaner will not allow the
battery to be charged until it has cooled down enough.
If the battery is too hot to charge, a “°C” symbol will show in Red colour. If this
happens, remove the vacuum cleaner from the charging dock and let sit for 15
– 30 minutes and then try again.
