hours. The timer will increase or decrease by 1 hour after each press. In the timer setting,
the timer symbol and
will light on and show on the display. The setting will be
memorized and confirmed after 3 seconds. You also can set temperature and power for turn
on timer. You can also cancel the TURN ON timer by pressing
button and the heater will
turn on directly.
For example, under standby mode, if you set the timer to 1 hour, the heater will switch ON
automatically after 1 hour.
5. Anti-frost function:
A. If heater is on standby mode and room temperature is lower than 5
o
C, the heater will
start heating and show
icon on the display.
B. When room temperature reaches 10
o
C, the heater will stop heating.
C. If there is a fault in the temperature sensor, it will show "E2" on the display.
OPERATING SOUND
The appliance emits a beep upon each operation setting.
NOTE:
There is a tip-over switch inside the heater. If the heater is knocked over, the power
to the heater will shut off automatically.
WARNING! FOR ELECTRICAL SAFETY THIS APPLIANCE MUST BE PLUGGED INTO
AN EARTHED ELECTRICAL POWER SOCKET OUTLET!
–
If you are uncertain,
please consult an electrician.
CLEANING AND MAINTENANCE
Before cleaning
-
When not in use or before cleaning, always disconnect the
appliance from mains power supply.
Cleaning
-
Cleaning must be done only when the heater has cooled down
completely.
-
Do not immerse the whole unit in water or other liquid.
-
Do not use harsh solvents on the unit.
-
Wipe the exterior of the appliance with a soft damp cloth.
-
Dry the unit completely with a dry cloth.
IMPORTANT! Check for damage
-
Always check that the appliance is in good working order, there is
no damage visible and all parts are secure.
-
Check the power supply cord and plug regularly for cuts or damage.
If any damage is visible on the product, DO NOT use the heater.
