0
6 |
Battery backup
In addition to the DC In power supply you can fit 2 x AA batteries (not supplied) in the
battery compartment (16) to provide a backup power supply. If the mains supply is
disconnected or interrupted the power supply is automatically switched to the backup
battery, so that the time and alarm settings are not lost. Please Note: speaker, radio
and charging functions will not operate when the clock radio is powered solely by
the backup batteries. When fitting the batteries make sure their polarity matches the
markings in the battery compartment.
Setting the time
1.
Plug in the AC/DC power adaptor supplied, the default time 0:00 will appear in
the LCD display (5).
2.
Long press the clock key (3), the LCD will display “24hr” press the (2) or
(4) keys to switch between 24hr and 12hr clock setting.
3.
Then press the clock key (3) again to set the hour use the (2) or (4) keys
to change the hour.
4.
Press the clock key (3) to set the minutes use the (2) or (4) keys to
change the minutes.
5.
Press the clock key (3) again to confirm the time set.
To reset the clock, long press the mode key (1) to enter standby mode then follow
steps 2-5 above.
Bluetooth pairing
1.
Press the mode key (1) twice to enter Bluetooth pairing mode. “
bt
” will appear in
the display and also the Bluetooth symbol which will flash.
2.
Place the device you want to pair with your alarm clock within 1m of it, enter your
device’s Bluetooth menu and select “43032969” in the device list. When your
alarm and device are paired, you will hear a chime and the Bluetooth symbol which
will stop flashing.
Once paired with a device the alarm clock will reconnect automatically when switched
to Bluetooth mode if the paired device is within range.
Bluetooth play operation
While listening to audio in Bluetooth mode:
1.
Press Volume
+
/
-
keys (8/9) to increase or reduce the volume level.
2.
Press the Next (4) or Previous (2) keys to play the next or previous track
.
3.
Press the Pause/Play key (3) to play or pause the track.
FM radio operation
1.
Press the Mode key (1) repeatedly until FM and an FM frequency appear in
the LCD display.
