CONTROL PANEL
BEFORE FIRST USE
Prepare the espresso machine
Prior to initial use and after a longer period of disuse of the espresso machine, allow the contents of
approx. 2-3 cups of water to run through the machine. This will clean the water circuit and all parts will
be heated up for proper operation.
During initial use, the water pump will be slightly louder. That is normal. After approx. 30 seconds,
when the system has filled with adequate water and the noise will become quieter.
Normal operation
1. Ensure that the espresso machine is switched OFF and disconnected from mains power outlet
socket.
2. Unfold the carrying handle on the water tank and remove the water tank upwards (
refer to
Fig. 1
).
3.Fill fresh, cold and still water into the tank. DO NOT exceed the maximum filing level mark ‘MAX’.
Fig.1
4. Reinsert the water tank in reverse order as described on step 2. Ensure that the tank is seated
Steam button
: press
down to steam and up
to stop
Espresso
brewing button
:
press down to
make coffee and
press again to
stop brewing
Temperature indicator
Steam controller
ON/OFF button
Espresso brewing indicator
(green): When temperature is
ready, the indicator light will
WXUQ 21
Power indicator
(red): When
the appliance is switched ON,
the indicator light will turn
ON.
Steam pressure indicator
(yellow): When steam
temperature is ready, the
indicator light will turn
ON.