6
HOW TO OPERATE
DO NOT operate this appliance without the Extractor Head in place.
NEVER place sugar or candy directly on the heating element as
sugar is flammable and could cause a fire.
1. First, find a stable surface near an electrical outlet before starting. Make sure the cord
is away from any water source.
2. Plug in unit on the OFF position.
3. Turn unit to ON position and allow appliance to run for at least 10 minutes before
adding sugar. This will allow the Extractor Head to heat up properly.
NOTE: Hard candy must not be used on the candy maker.
4. Turn unit OFF and place
no more than
one spoon of flavoured sugar into the
Extractor Head.
5. Switch to ON position.
6. When you see the cotton candy web begin, collect the cotton candy on a cone by
holding the cone vertically. Rotate the cone with your fingers while you circle the
bowl.
7. Once cotton candy has collected on the cone, hold the cone in a horizontal
position over the Extractor Head while still rotating the cone with your fingers.
Continue turning the cone with your fingers while the cone is in the horizontal
position and move from side to side making sure to collect all the cotton candy.
8. Repeat above steps by adding another spoon of sugar into the Extractor Head
and starting again. The cotton candy should flow more quickly as the unit is
sufficiently warm.
NOTE: DO NOT overfill the Extractor Head by adding more than 1 spoon of sugar at a
time. This will cause clogging and unit will not work properly.
CLEANING AND MAINTENANCE
1. Make sure the unit is unplugged and cooled before cleaning.
