4 |
P a g e
PARTS
A)
Ceramic coated bristles
B)
Swivel cord
C)
On/Off button
D)
Temperature control button
E)
LED display
BEFORE FIRST USE
After unpacking the appliance, check for transport damage and that all the parts
mentioned in this manual are present. In the event of damaged or missing parts,
return the product back to Kmart.
Do not discard the original box. It can be used for storage and dispatch to avoid
transport damage.
Clean the appliance as described in Cleaning and Maintenance. For your safety make
particular attention to the safety instructions supplied in the instructions manual.
OPERATION
WARNING!
Never touch the hot bristles. Always use the handle to hold the hair brush.
ATTENTION!
The heating bristles cool down slower than they heat up.
Fully unwind the supply cord. Make sure the ON/OFF switch is in OFF position.
Place the appliance on a smooth, flat, dry surface.
Connect the supply cord plug into a mains power outlet socket, the LED display shows
“OFF”. This indicate the appliance is in Standby mode.
Press and hold the ON/OFF button to turn ON the appliance, the LED display will show
180°C.
Use the temperature control buttons “+” or “-” to select desired temperature.
Default setting is 180°C, you may select temperature range between 80°C and 200°C.
A steady temperature display will be shown when the hair brush had reached the
temperature you have set.
ATTENTION!
The hair straightening brush heat up very fast. It takes approx.4 minutes to
each max. temperature.
When the appliance is ready, you may start hair styling.
