4 |
P a g e
PARTS
A)
Heating pate
B)
On/Off switch
C)
Power indicator
D)
Plate lock
E)
Swivel Cord
F)
BEFORE FIRST USE
•
After unpacking the appliance, check for transport damage and that all the parts
mentioned in this manual are present. In the event of damaged or missing parts,
return the product back to Kmart.
•
Do not discard the original box. It can be used for storage and dispatch to avoid
transport damage.
•
Clean the appliance as described in Cleaning and Maintenance. For your safety make
particular attention to the safety instructions supplied in the instructions manual.
OPERATION
WARNING!
Never touch the hot heating plates. Always use the handle to hold the hair
straightener.
ATTENTION!
The heating plates cool down slower than they heat up.
•
Fully unwind the supply cord. Make sure the ON/OFF switch is in OFF position.
•
Place the appliance on a smooth, flat, dry surface.
•
Connect the power plug to socket.
•
Push the ON/OFF switch to ON position, the power indicator will light up.
ATTENTION!
The heating plates heat up very fast. It takes approx.3 minutes to each max.
temperature.
•
When the appliance was ready, you may start hair styling.
•
To begin straightening hair, take a section no more than 4 to 5cm wide. Place the hair
between the two flat plates as close as you can near the scalp.
•
Hold the plates tight for a couple of seconds and slide the straightener in even motion
towards the ends. For the best results, hold the hair while smoothing the section.
•
CAUTION!
Do not hold the hair between the plates for more than a couple of seconds
as this may damage your hair.
•
When you have finished one section, move to another area of hair and repeat the
process. Allow the hair to cool before combing through.
•
After using, turn OFF the appliance, make sure the power indicator has gone off.
•
Unplug the appliance the put it on table allow for cooling.
•
CAUTION!
Allow to cool before putting it down or storing away.
