4
OPERATION INSTRUCTIONS
1.
Place the motor unit on the flat surface. Make sure the product is not connected to
mains power.
2.
Place the jar on a flat surface with the open ending facing up. Fill the jar with your
favorite ingredients. Be sure not to fill ingredients exceeding the 600ml marking.
Note:
The appliance can blend ice cubes not larger than 2cm X 3cm in size.
Note:
For optimal performance, place desired ingredients in the jar according to the
following order: liquids, fresh ingredients, frozen fruit, yogurt and ice cream.
3.
It must be noted that fruits or vegetables should be peeled or cored and then cut
into small dices. Generally, the size of fruit or vegetable dices is 15×15×15mm. The
seedcase of fruit or vegetable must be removed, such as carrots, strawberries,
pineapples, lemons, grapes, and tomatoes.
IMPORTANT! To avoid damage to the product DO NOT blend hard or dry
ingredients.
Recipe
FOOD TYPE
SPEC
WEIGHT
TIME
Carrot
Cut into 15mm*15mm*15mm
Carrot: 200g
Water: 300g
30s
Note:
Never use boiling liquids or run the appliance empty.
4. Assemble the blade assembly on the opening end of the jar by turning it in
clockwise direction.
5. Upend the assembly of jar and blade assembly, insert them into the motor unit.
Make sure the arrow on the motor unit is aligned with the blade assembly, then turn it
in a clockwise direction to lock it in place.
6. Connect the plug into mains power and the appliance will start operating.
IMPORTANT! To prevent damage to the electric motor, the appliance can be
operated without interruption for 30 seconds. Allow it to rest for 1 minute before
using it again. After 5 cycles, allow it to cool down to room temperature for
approximate 30 minutes.
7. When the operation is finished, turn the jar assembly anti-clockwise and the
appliance will stop operating. Remove the jar and unplug the blender plug from the
mains power outlet.
8. Upend the jar assembly, hold the jar with one hand, and turn the blade assembly in
an anti-clockwise direction with the other hand to remove it.