anko AFLW60G, Инструкция по эксплуатации

Страница: 10 / 24

10
Quick Start Guide
QUICK START:
Follow the procedure below to operate your washing machine.
1. Install your washing machine.
2. Turn on the water supply.
3. Plug in the power supply.
4. Open the door and load in the laundry.
5. Close the machine door.
6. Measure the detergent and pour in the appropriate amount.
7. Select the desired program.
8. Select any additional functions if required.
9. Press the Start/Pause button to begin.
10. Completion of the washing cycle.
• At the completion of a wash program, the washing machine will make an audible tone.
11. Turn off the water supply
• Although the washing machine would be switched off, the power
outlet should be switched off and the plug should be pulled out for safety reasons.
OPTIONAL FUNCTIONS
SPEED
Speed can be set by pressing the speed button repeatedly to select your desired speed
EXTRA RINSE
Provides an extra rinse at the end of your selected cycle.
PRE WASH
The Prewash function provides an extra wash before main wash,it is suitable for washing the dust
that rises to surface of the clothes;You need to put detergent into Case (I) when selecting it.
DELAY START
Delays the start of your washing load for 0-24 hours.
OPERATIONS
Child Lock
To avoid mis operation by children.
Start
Press
[
Delay
]
and
3 sec. till buzzer beep.
[
Function
]
Delay
Choose the
Programme
Caution!
Function
Speed
: The speed is
1000: 0-400-600-800-1000 1200: 0-400-600-800-1000-1200
1400: 0-400-600-800-1000-1200-1400
Programme
Default Speed(rpm)
Cotton(Cold)
Cotton (20
℃)
Cotton (40
℃
)
Cotton( 60
℃
)
Jeans
Delicate
Cotton ECO
Spin Only
Programme
Rinse&Spin
Heat Wash 90
℃
Mix( 60
℃
)
Mix( 40
℃
)
Mix( 20
℃
)
Rapid 45’
Quick 15’
Default Speed(rpm)
1400
1000
1000
1000
1000
1000
600
1000
1400
1000
1000
1000
1000
1000
800
800
1400
1000
1000
1000
1000
1000
1000
600
1000
1000
1000
1000
1000
1000
1000
800
800
1000
Other Functions
800
1000
1000
1000
1000
1000
600
1000
1200
1000
1000
1000
1000
1000
800
800
1200
16
When the program finished "END" and "CL" flashed alternately on the screen.
• During the “Child Lock”function is activing, the buzzer will beep 3 times,
When the buttons are pressed.
• Press the two button 3sec. also to be released the function.
• The “Child Lock” will lock all buttons except Power button.
•
,