Remove plug from socket when not in use.
During sterilising, if the lid is opened, the program will end automatically to protect human body from
direct radiation.
Closing the lid will not restart the program. User shall follow operation procedures on pages 5 and 6
to restart the program.
Usage Method
Preparation for Operation
Functions & Operation
1. Wash and dry the bottles you wish to sterilise before placing into the UV steriliser.
2. Hang the accessories basket on the liner hook, then put the teats that needs to be dried and
sterilised into the accessories basket.
3. Close the display cover.
”DRY” function :
This function is used only when drying items, no sterilise function will be performed.
(1) Before using the DRY function, open the display cover as shown in Figures 1 and 2.
(2) Place the bottles/teats to be dried into the inner tank/accessories basket and close the display
cover as shown in Figures 3 and 4.
(3) Plug the steriliser into the mains socket.
(4) Press the "Dry" button. The time display light will flash for 3 seconds. The LED light will be on. The
remaining time will be displayed. The air exchange will take place in the last 60 seconds of the
cycle. There are 2 drying options : 41/51 minutes. Press the "Dry" function button again to cancel if
required.
1.
Sterilise Function:
This function is used to sterilise items only, no drying function will be performed.
(1) Before using the "Sterilise" function, open the display cover as shown in Figures 1 and 2.
(2) Place the bottles/teats to be sterilised into the inner tank/accessories basket and close the
display cover as shown in Figures 3 and 4.
(3) Plug the steriliser into the mains socket.
(4) Press the "Sterilise" button. The time display will flash 3 times, then the program will start. Digital
display shows remaining operation time.
There are 3 operation times for selection. The default time is 11 minutes. Press again for 16
minutes and press twice for 21 minutes. Press one more time to turn off the appliance.
2.
“Auto” Function:
This function is used to both sterilise and dry.
(1) Before using the “Auto” function, open the display cover as shown in the Figures 1 and 2.
(2) Place the bottles/teats to be dried and sterilised into the inner tank/accessories basket and
close the display cover as shown in Figures 3 and 4.
(3) Plug the steriliser into the mains socket.
(4)
3.
“Storage” Function:
This function is to be used to store the clean items.
(1) Before using the “Storage” function, open the display cover as shown in Figures 1 and 2.
(2) Put the bottles/teats to be dried and sterilised into the inner tank/accessories basket and close
the display cover as shown in Figures 3 and 4.
(3) Plug the steriliser into the mains socket.
(4) Press the "Storage" button. The time display will flash 3 times, then the program will start.
(5) This is a 2 stage program. It begins with 51 minutes "Auto" function, then followed by 72 hours
"Storage" function.
(6) During "Storage" period, the unit will perform the sterilisation process every 2 hours.
(7) Press "Storage" button again to turn off the appliance.
4.
5.
Note: When the “DRY” function is completed, the buzzer sounds 6 times. It enters the standby mode.
Note: When the “Auto” function is completed, the buzzer sounds 6 times. It enters the standby mode.
Note: When the "Storage” function is completed, the buzzer sounds 6 times. It enters the standby mode.
Note:
Note: When the "Sterilise" function is completed, the buzzer sounds 6 times. It enters the standby mode.
Press the "Auto" button. The time display will flash 3 times, then the program will start.
Drying function will be carried out first, followed by the sterilisation. The air exchange will
take place in the last 60 seconds of the operation cycle. There are 2 operation durations for
selection. The default time is 51 minutes. Press again for 61 minutes. Press one more time to
turn off the appliance.
