Remote control
1.
On/Off switch
2.
White light (mixed colour)
3.
Flash (flashing function)
4.
Strobe (slow fading out of a colour)
5.
Fade (slow fading out with colour change)
6.
Smooth (smooth colour change)
7.
Control panel for colour selection (12 mixed col-ours)
8.
Red, Green, Blue colour
9.
Increase/decrease the brightness/
Fast or Slow rate in
flash/strobe/fade/smooth mode
Changing the remote-control battery
1.
The battery for the remote control has already been inserted. Remove the transport guard
before use
2.
Drive out the screw on the battery door.
3.
The battery compartment is located on the narrow side of the remote control. Pull it out as
shown.
4.
Remove the empty battery and insert a 3V battery, type CR2025. The positive terminal must
point upwards.
5.
Place the battery compartment back in the remote control so that it locks in place.
Production Specification
RGB LED STRIP LIGHT
Input: DC 5V 2A max via USB port.
Keycode: 42724469,42724476
