anker kassensysteme gmbh
Make sure that the pins on the back of the tab-
let case are locked (to the right).
Now fasten the enclosed M3x4 screws as
shown.
4.6. Screw locking of the tablet (optional)
To replace the tablet housing, first loosen the
cover caps of the constant-torque-hinge. Then
loosen the screws. Hold the tablet housing while
loosening the screws so that the housing does
not fall off. Now fasten the new tablet housing to
the bracket. Now slide the cover caps back over
the constant torque hinge.
4.7. Exchange of the tablet housing
