English
English
08
09
Getting Started
1.
Placement
Place Nebula Prizm II Pro on a flat and stable surface, and
squarely point it to face the projection surface. For best
results, the projection surface should be white and flat.
The distance between this projector and the projection
surface must be a minimum of 39.4 inches (1 meter) and a
maximum of 118 inches (3 meters).
1
39.4” 118”
Nebula Prizm II Pro comes with a flip stand. To use the flip
stand:
①
Press the
button.
The flip stand pops out.
②
After use, press the
button again, and
simultaneously press in the stand to push it back into the
slot.
Note: You can also install your projector in the following
ways: behind the projection surface, hanging from the
ceiling in front of the projection surface, or hanging from
the ceiling behind the projection surface. Make sure you
select the correct
Projector Mode
option in the menu
settings.
2.
Select Projection Distance
The distance between Nebula Prizm II Pro and the
projection surface determines the approximate size of the
image. Use the table below to determine approximately
how far to place Nebula Prizm II Pro from the projection
surface based on the size of the projected image.
Screen size (length × width)
Projection distance
(m)
50 inches (110 cm × 62 cm)
59.1 in (1.5 m)
55 inches (122 cm × 68 cm)
64.2 in (1.63 m)
80 inches (177 cm × 100 cm)
91.7 in (2.33 m)
100 inches (221 cm × 124 cm )
113.4 in (2.88 m)
120 inches (266 cm × 150 cm )
135 in (3.43 m)
D2241_EN_Manual_60X110mm_20181121_V01.indd 8-9
2018\12\21 星期五 16:37:37