05
04
3.1
Basic Operations
Chapter 3. Using Your Aroma Diffuser
2.3
Notes Before Use
2.2
Specifications
Chapter 2. Before Use
1. Check if all the parts in Package Contents are included and intact.
2. Clean the diffuser before the first use, and wipe it down after rinse.
3. Always insert the essential oil tube into the tube holder vertically.
4. Ensure electricity specifications are in line with your local valid electricity
regulations.
Power Source
24V 500mA
Power
<10W
Working Time
>5h (High Mist)
>8h (Low Mist)
Mist Output
60 ml / 2.0 fl. oz (High Mist)
30 ml / 1.0 fl. oz (Low Mist)
Water Tank Volume
300 ml / 10.0 fl. oz
Ultrasonic Frequency
2.4MHz
Noise Level
≤
26dB
MAX
Note:
- It is recommended to use purified or
distilled water.
- DO NOT operate the diffuser without
water.
- Water left overnight should be replaced
with fresh water.
- Never pour essential oil into the tube
when there is no water inside the tank.
- Leave enough circulation space around
the unit.
2. Add water into the tank.
(not higher than the MAX
water level)
3. Add essential oil into
the tube until water-
oil balance, and DO
NOT move the unit.
1. Plug the adapter into
AC outlet. The diffuser
will enter standby mode.
4. Drain excess water
via the drain side if
necessary.
