Anita GARUDAN GF-1130-4412 MH, Руководство пользователя

Страница: 29 / 71

© ANITA
MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH 29
G5.2. Operation panel keys description
Button Name Description
1 Function
(Parameters) Use the button to select and confirm parameter
settings and return to the sewing mode.
2 Start back tacking Selects and turns on the initial back tacking.
3 End back tacking Selects and turns on the end back tacking.
4 Free sewing mode
Selects free sewing mode. The icon lights up on the
display. Press the foot control to start sewing.
5 W sewing mode
key
Press this key to enter the W sewing mode. LCD
icon is on. In W sewing interface use the
corresponding key „+“ or „ - „ to set number of stitches
of each segment (A, B, D) default range 1~F
corresponds to the value 1~15.
6 Multi-segment
sewing Press this key to enter the multi-segment sewing
mode. LCD icon is on. In multi-segment sewing
interface use „+“ or „ - „ key to set
max. 24 segments. P01 is number of segments, -01 is
current segment setting, -16 is number of stitches in
the segment.
7 Four-segment
sewing Press this key to enter the four-segment sewing
mode. LCD icon is on. In four-segment sewing
interface use the „+“ or „ - „ key to set
number of stitches of each segment (E, F, G, H)
default range 1~F corresponds to the value 1~15.
8 Slow start
When the icon is lit, the slow start mode is on.
Press the key again for turning the slow start mode
off.
9 Thread clamp
When the icon is lit, the thread clamp mode is
on. Press the key again for turning the thread clamp
mode off.
10 Needle up/down
stop position Set the stop position of the needle. When the icon
is lit, the needle stops up. When the icon , is
lit, the needle stops down in the fabric. Note: you
can select needle stop position directly as parameter
www.garudan.cz