background image

The following points should be observed when
wiring a new plug:

1. The green/yellow-coloured wire 

(“EARTH”) should be connected to the
terminal which is either marked with the
letter “E”, the “earth” symbol (    ) or 
coloured green or green/yellow.

2. The blue-coloured wire (“NEUTRAL”) 

should be connected to the terminal
which is either marked with the letter "N" 
or coloured black.

3. The brown-coloured wire (“PHASE”) 

should be connected to the terminal
which is either marked with the letter "L" 
or coloured red.

IMPORTANT!
The 3 core main cable (fig. 2) has the
following wiring code:
Green/yellow - Earth
Blue

- Neutral

Brown

- Phase

Animo

5

10/97

WKT-D 10/18L

WARNING

* Always remove the plug from the socket if the machine has to be opened for repair or

maintenance.

* Do not position the machine in areas where the temperature drops below freezing point

because there is always water left in the system.

* Always plug the machine into an earthed wall socket. 
* Do not submerge or spray the machine.
* Have all repairs carried out by a specially trained technician.
* During use, some parts will become very hot.
* In case the machine is not used for a relatively long time, it is advisable to remove the plug from 

the socket.

!

Fig. 2

Green/Yellow - Earth (E)
Blue

- Nul

(N)

Brown

- Phase (L)

3. INSTALLATION

Follow the instructions to place and connect
the machine, specified below.

3.1 Placing the machine

Place the unit:

at counter level and on a solid flat 
surface.

where it can be connected to the 
electricity grid.

Such that it is not causing any damage
in case of leakage.

3.2 Connection to the electricity supply 

system

Depending on the model, the appliance 
should be connected according to the 
instructions in the figures below.

(fig. 2) For 240V 1 phase with
plug socket.

(fig. 2) For 240V 1 phase (3-core cable).

The following remarks apply to figure 2:

If the plug fitted on the machine cable 
does not fit to your socket, replace it 
with a new plug that does fit.      

The replaced plug should be disposed
of as it can be dangerous if plugged in 
a socket.

Содержание WKT-D 10/18L









Отзывы: