3.4 Apply sticker
A sticker reading “Do not draw hot water during
coffee making” is supplied with the appliance.
Affix the sticker at the place indicated in the
appendix (part no. 08526).
4. CONTROL PANEL (FIG.2)
A - Heating indicator lamp
B - On/off switch
C - Selection switch for full / half-full jug
D - starter switch.
5. SET HEIGHT
The height of the appliance can be adjusted. To
set the appliance at the best possible height for
the thermos jug to be used, the following actions
should be carried out.
1.
Slide the sliding filter into the filter holder.
2.
Keep the upper part of the appliance in
place and turn the adjustment button
(fig. 1G) half a turn anti-clockwise to
loosen it.
3.
Move the upper part of the appliance up
or down until the thermos jug you will be
using fits between the foot and the
sliding filter.
4.
Place an empty thermos jug (without cap)
under the sliding filter.
5.
Leave about 1 cm space between the sliding
filter and the thermos jug.
6.
Tighten the adjustment button (clockwise).
6. COMMISSIONING
The following proceedure should be carried out
before a new appliance is used.
1.
Open the manually operated bleed valve
and check that the swivel connections are
not leaking.
2.
Place the drip tray in front of the appliance.
3.
Remove the cover of the water reservoir and
remove the transparent blending tray
vertically from the appliance.
4.
Pour one thermos jug of water into the
reservoir.
5.
Replace the transparent blending tray in the
appliance (see Fig. 3A)
6.
Insert the sliding filter into the filter holder
and place an empty thermos jug on the
central tray.
7.
Insert the plug in the socket and turn the
appliance on at the on-off switch (Fig. 2B).
8.
The water reservoir will fill with water
and the indicator lamp (Fig. 2A) will light
up. The water in the reservoir will heat up.
9.
The water will be up to temperature in
about 7 minutes and the indicator lamp will
go out.
10.
Set the selection switch (Fig. 2C) for the
required quantity.
11.
Press the starter switch (Fig. 2D). The water
reservoir will fill up. Once it has filled, the
cold water will force the hot water through
the sliding filter.
12.
Do not forget to empty the thermos jug
after the sliding filter has stopped dripping.
13.
The appliance is now ready for use.
7. USE OF THE TV B200W
•
For making coffee, see paragraph 7.1.
•
For drawing off hot water, see paragraph
7.2.
Basic rules for making coffee
•
Use extra-fine grind (approx. 40 grammes
per litre).
•
Keep the thermos jug and the sliding filters
clean.
•
Hint! Keep a pile of basket filter papers
in the spare sliding filter or place a filter
paper with coffee in this filter so that the
next serving can be prepared without
losing time.
Animo
TVB 200 W
09/99
4
