Animo
7
09/99
A 202 W
7.
Allow the hot water reservoir to drain until
no more water comes out of the tap.
8.
Switch on the machine (fig. 2I) and allow
the hot water reservoir to return to
the correct temperature.
9.
The cold water reservoir fills itself
automatically to the correct level.
10. Draw off at least 3 jugs of water through
the tap.
11. The hot water unit is now ready to be
used again.
9. TEMPERATURE SECURITY
The hot water unit is supplied with a temperature
security that can be accessed from the outside.
The security is installed at the back of the device,
next to the electricity cable connection. The
security is activated when the temperature gets
too high.
In case the security was activated, do the
following:
1.
Make sure the machine is cooled down.
2.
Unscrew the black protective cover.
3.
A button becomes visible. Press it and
tighten the cover.
If you find the technical malfunction not to be
caused by the temperature security, contact your
dealer.
