A
MOUNTING
[1]
Wall mounted version
⚠ The device must not be mounted in an electrical cabinet
⚠ Do not cross cables over the product!
B
WIRING
[1] Wiring diagram
A. IP Bus (input/output)
The cable used for the IP Ethernet connection must be a shielded cable.
The shield needs to be connected on both ends.
n
Not compatible with PoE switch.
B. Green = boot process or power
Red = malfunction or update process
[2] Topology
C
COMMISSIONING AND OPERATING
Complete installation of all devices.
Connect the PC to the IP input.
Run the animeo Connect Operating Software and follow the procedure described in the software guide.
EN
CHARACTERISTICS
Supply voltage
24 V DC +/- 10 % SELV/1 A max.
Power Supply
Mandatory use of certified power supply with limited power (certified according to the
relevant version of 60950-1 or 62368-1, EN/IEC or UL as needed in the country of use).
Limited power classified as LPS, PS2 or UL class II (according to standard).
Minimum current
32 mA
Max. current
40 mA@24 V
Minimum power
0.74 W
Radio frequency
868 MHz
Radio range
min. 200 m in open field
Operating temperature
0 ° C ... + 50 ° C
Relative humidity
85 % at 30 ° C
Material of housing
ABS
Housing dimensions (w x h x d)
133 x 86 x 44 mm
Protection class
III
Degree of protection
IP20
Pollution degree
2
Conformity
www.somfy.com/ce
CABLE
We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an approved collection point for recycling.
Connection to …
Cable
Twisted pair
Max. length
Power Supply
–
1.8 m
Ethernet
Cat. 6
–
100 m
animeo
Connect
. IP/io Gateway . Ref. 5137982A -
6/20
