Animated Lighting, Inc PAGE 2
Single Pumpkin Face Package
ADDRESSING:
Locate the two dials on the same board as the RJ45 (8-pin) jacks that
say A1 and A0 on them. These dials need to be set at “1” (A1) and “4” (A0). These dials
will be changed based on the size of your display (the number of light controllers that are
used).
CONNECT WITH A CATEGORY 5
COMMUNICATION CABLE
PLUG THESE CHANNELS INTO
THE LIGHT CONTROLLER
USING THE CHART ON PAGE 3
AS YOUR GUIDE.
MBX32
PWR
Audio
Port 1
Port 2
Play
Term
MP3 DMX
HB SD IP
