Anhui Yine YN-CA Buck Series Скачать руководство пользователя страница 3

YN-C Buck series solar charge controller

1

I. Safety instructions:

1.1 Safety signs

The following safety symbols may appear in this manual and their meanings are as

follows:

safety symbols

signification

Danger

Indicates that if the safety warning is ignored, there is a serious

accident that may lead to personal injury.

Warning

Indicates that if safety warnings are ignored, there is a risk of serious

injury, serious equipment damage or major business interruption.

Notice

This means that if safety warnings are ignored, there is a risk of

moderate injury, moderate equipment damage or partial business

interruption.

Insturction

Indicates that the content is additional information for the body.

For electrical and electronic equipment, safety involves the entire process of installation,

commissioning, operation and maintenance. Therefore, incorrect use or misuse will

endanger the life and personal safety of the operator or a third party and the safety of the

equipment. In order to avoid personal injury and damage to the equipment, all safety,

warnings and cautions such as the following are strictly observed during operation and

maintenance.

1.2 Safety instructions

Warning

All installation operations on the controller must be performed by a qualified technician.

Professional and technical personnel must undergo special training, complete the manual and

understand the safety related to the operation.

If a non-professional person performs installation operations and causes personal injury,

the company will not be responsible.

Failure to install and operate the controller in accordance with the instructions in this

manual will result in damage to the controller and will not be covered by our warranty.

Before installion

Notice

When receiving the product, first check the MPPT series controller for damage during

transportation. If you find any problem, please contact our company or the transportation

company immediately.

installing

Before installing the MPPT controller, make sure that the MPPT controller has not been

electrically connected and powered.

Содержание YN-CA Buck Series




























Отзывы: