Please take a few moments to read this booklet before setting up your new loudspeakers. In addition to the
advice it contains, you may want to discus the installation with your reseller who will be able to assist you in
achieving optimal performance. Alternatively, feel free to contact us directly with any queries you may have.
Unpacking
In the carton you will find: 1 or 2 SUONO loudspeakers and 1 or 2 wall brackets, located under the inside flaps
at each end of the carton. The 200S, 300S, 500S are packed as a single unit. We suggest you keep all the
packaging for safe transport of your loudspeakers in future. Always re-pack them facing front to front in the
carton to avoid damaging the grille cloth.
Connections
Before making any connections, please remove the Bottom Cap (as
shown in the adjacent diagram) by pulling out the cap.
Connect a loudspeaker to each channel of a stereo amplifier/receiver.
Connect the ‘+’ (red) and ‘-‘ (black) side of each channel to the ‘+
‘ and ‘-‘ loudspeaker terminals. Use good quality cable.
Replace the Bottom Cap securely after making the connections.
Your System
While costly hi-fi components will achieve their potential with SUONO loudspeakers, remarkable results can also
be obtained with the Home Theatre in a Box based systems. SUONO loudspeakers are easy to drive, ideal for
amplifiers from 10W per channel upwards. Although the maximum volume is reduced with small amplifiers, they
will still give satisfying sound. In general, more powerful amplifiers improve the sound by allowing greater
headroom for musical peaks. Additional low frequency information can be reproduced by using the matching
any Angstrom’s active low frequency transducer (subwoofer).
Running in
The SUONO loudspeakers sound their best after a running in period. Bass increases during running in, and
both total balance and smoothness improve as the woofer suspension loosens up. Five to ten hours use at
reasonable levels will accomplish this, although the loudspeakers continue to improve for up to 30 hours before
stabilizing. Avoid critical listening before running in, as the loudspeakers were “voiced” for the correct tonal
balance after running in.
