10
7.3
Practical tip
It is often the case that the mA signal is not displayed within comfortable viewing distance of
the measuring module. We therefore suggest that you temporarily remove the connections
from the ‘-mA’ and ‘+mA’ terminals and connect up a standard portable mA multimeter
instead.
You can now make any checks and adjustments you need. After completing the settings,
restore your previous connections.
7.4
Defining the analogue outputs
The two measuring ranges for analogue output can be switched using a jumper between
terminals ‘Switch’ and ‘Switch’. Or you can switch measuring ranges automatically via a
potential-free contact.
9
PZA-MC25_1620-17485-0002-E-0821
