Anglerfish Creative Lighting TRIGGER V3.0, Руководство пользователя

Страница: 13 / 15

p.9 Anglerfish Crea�ve Ligh�ng | Anglerfish Trigger V 2.0
Single core cable s are prone to failure and will not func�on
properly with the Anglerfish Trigger.
In some situa�ons, salt and dart accumulates on the surface
of the remote strobe ’s op�cal bulkhead. Inspect the
bulkhead for debris, salt or fouling. Cleaning the inside of
both the remote strobe and the trigger op�cal bulkhead s
with rubbing alcohol and Q - T ips will ensure maximum light
transmission and op�mal prepe rformance.
Some strobes with weak light sensors may not fire while
using the op�cal cable. In this situa�on please use the
electrical cable.
Remote Strobe Triggering Randomly:
It is unlikely that the remote strobe fires randomly. However,
if this happens it means that the Nikonos bulkhead or the
sync cable connect
ed to the strobe has been flooded. Turn
off the strobe and assess the cable o - rings for damage or
debris.