Anglerfish Creative Lighting TRIGGER V2.0, Руководство пользователя

Страница: 11 / 18

p.7 Anglerfish Crea�ve Ligh�ng | Anglerfish Trigger V2.0
Switching Modes
The trigger has two modes: red and blue . The red mode is
used only when the trigger is u�lized with the electronic sync
cable. The blue mode allows the user to u�lize both the
op�cal cable and the electronic sync cable. To switch
between modes simply hold a
small magnet against the
magne�c switch area wh ile the unit is powered up. The
menu LED should turn purple un�l the magnet is released,
a�er which the trigger mode changes.
The trigger sensor is very sensi�ve and in some situa�ons the
flash from the
red
LED will be detected by the trigger
resul�ng in false trigger. In this situa�on, its recemented to
use the blue mode.
Low Battery Indicator
If the trigger’ s batery power is low, the trigger’ s menu LED
will blink red and blue for five cycles and the trigger will