Angioscan Electronics AngioScan-01, Руководство пользователя

Страница: 60 / 119

56
© 2014 AngioScan-Electronics LLC
Graphic Interface
Device status indicator
On the left side of AngioScan main window there is a device status indicator showing current state of the
device in graphic mode, separately for channels 1 and 2:
If you move the cursor to indicator, the tooltip will show the information about current state of the device
in text format.
Mode examples:
Device is not found
Channel 1: the sensor is connected to device, but it is not put on finger; channel 2: the sensor is
connected to device but it is not being used during the test
Channel 1: the sensor is connected and put on finger, channel 2: the sensor is not connected to
device
When sensors of both channels are used during the test (occlusion test), and none of them is put on
finger, status of channels can randomly change. It is not malfunction of device.
5.1 AngioScan windows
Main window of AngioScan program contains patients database window and measurements window, by
the help of which the medical tests are performed. Usually these two windows are open at the same
time; it is convenient to switchbetween them by the help of main window's control panel:
Window "Patients"
Window "Measurements"
5.1.1 Window "Patients Database"
This window is designed for work with patients database. Here you can add, remove and edit records of
patients' test results, view test results stored in database, search, export measurement data and
perform other operations.
To quickly switch to patients database window, click its button on toolbar of AngioScan main window: