9
Please refer to the installation process as the following drawing:
3. Audio/Video output connection
Connect the monitor to A/V output terminal. There are two A/V output terminals
for easy install.
4. System camera installation
Connect one end of camera cable to Camera and the other end to Video Input
port at the back of DVR. Please duly number the camera for convenient
operation.
5. Power connection
Plug the power cord to this connector and the other end to Battery (e.g. car
battery). When the power is connected, the DVR is ready to be used.
The built-in power supply with delay circuit board is designed for DVR to delay
switch-on time for 10 seconds. With the delay, it can avoid DVR working on
unstable voltage.
Switch on/off voltage: 10.5 ~10.8V
Delay switch-on time while starting the car: 10 seconds