Angelo Po 1G1PE1E, Инструкция по использованию и установке, Страница: 32 / 103

IT
GB
DE
FR
ES
- 12 - C
1
3
1
4
3
1
3
0
.f
m
English
IT
GB
DE
FR
ES
Caution - warning
Never use products containing substances
harmful or hazardous for health (solvents, pe-
troleum spirits, etc.).
4 - Rinse surfaces with drinking water and dry.
5 - Take special care not to damage stainless steel
surfaces. In particular, avoid the use of corro-
sive products and do not use abrasive materials
or sharp tools.
6 - Remove the limescale deposits which may form
on some of the appliance's surfaces.
To carry out this operation, proceed as follows.
1 - Remove the bottom plate (A) and the grid (B)
from the oven and clean them thoroughly.
2 - Clean the inside parts of the oven to remove
any deposits which may impair its operation.
3 - Dry the surfaces and reassemble the compo-
nents.
To carry out this operation, proceed as follows.
1 - Switch the appliance off and leave it to cool.
2 - Turn off the circuit-breaker to disconnect it from
the electrical mains.
3 - Clean the plate thoroughly with a sponge and
normal detergent, rinse with plenty of water and
dry.
Important
Do not spray water onto the plates when
still hot as this can damage them.
4 - From time to time, after cleaning the plates, ap-
ply a small amount of linseed oil or a similar
product.
CLEANING OVEN
CLEANING THE PLATE
IDM-39615101000.tif
A
B
IDM-39615101100.tif