ASSEMBLY INSTRUCTIONS
1. Feed the tubing from the top bowl (B) down
through the opening in the top of the fountain
body (A). See Fig.1. Align the grooves in (B) with
the holes in (A) and lower onto (A).
2. Using the access hole at the rear of the
fountain (A), locate the tubing from inside.
Attach the tubing to the pump (D). Place the (D)
inside (A). See Fig. 2.
3. Align the power cord with the corresponding
groove and slide the pump access door (C) in
place. See Fig. 3.
4. Fill the water reservoir with enough water to
completely submerge (D).
5. Connect the power cord into the electrical socket
to run the fountain.
Fig. 1
Fig. 3
Fig. 2
A
A
A
C
D
B
B
B
