Angelcare AC401-A, Руководство пользователя, Страница: 19 / 58

OUT-OF-RANGE ALARM
• Alarm activates when your two units are not communicating.
• The Parent Unit will emit a double beep every 8 seconds.
•
Out of Range Icon will flash on the screen.
IMPORTANT
If the Out-of-Range function is activated and you turn the Nursery Unit OFF the
Out-of-Range Alarm
will sound and/or vibrate (depending on the alarm mode chosen).
Turn the Nursery Unit ON again to reactivate the link.
TO STOP THE OUT-OF-RANGE ALARM:
Press 2 seconds
to turn the Parent
Unit
OFF.
OR
Turn the Nursery
Unit ON.
The Out-of-Range will flash
when changing the channel
or if the unit is reconnecting.
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IF YOU HEAR NO SOUND:
• Check that both units are switched on.
• Check that both units are plugged into
functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them as necessary
per unit).
• Bring the Parent Unit closer to the
Nursery Unit.
IMPORTANT
To avoid feedback (whistling),
keep both units at least 10 feet
apart (3 meters).
5.5 - SOUND TRANSMISSION (VOX)
Allows you to select your option on how you monitor sound:
VOX (voice activation picks up sound based on the setting of the sensitivity level) or
Continuous
(Monitors continuously so will pick up all sounds).
TO ACTIVATE VOX MODE:
1)
Press
MENU
button 3 times.
The VOX icon will appear.
2) Using the arrows, to turn the function
ON or OFF .
NOTE:
By deactivating VOX the Continuous
setting is ON .
3) Press SELECT button to confirm
your choice.
1
2
VOX ON
(VOX)
VOX OFF
(Continuous)
19
E
N