Angelcare AC117, Руководство пользователя, Страница: 76 / 100

Power On/Off Light Indicator
Low Battery Light Indicator
Flashing green
Nursery unit is using the
back‑up batteries
Flashing yellow Nursery Unit batteries are low
Steady green Monitor is activated
Sensor Pad Light Indicator
Temperature Indicator
Flashing red No movement is detected
Flashing white Monitor is paused
Flashing light blue
Loss of connectivity between the Nursery
unit and the Sensor Pad
Steady Red Room temperature is too hot
Steady Blue Room temperature is too cold
Steady White Room temperature is good
LOSS OF CONNECTIVITY BETWEEN THE PARENT UNIT AND THE NURSERY UNIT
• In the case of loss of connectivity, the first step is to bring the Parent Unit and Nursery Unit closer together
and make sure that both units are ON to restore the connection. If there is still no connection and no out‑of‑
range warning after the above has been done, then and only then should the re‑connection procedure below
be done.
3
1) Turn both Units OFF.
2) Turn the Nursery Unit ON.
3) Press 4 consecutive times the Power ON/OFF
button on the Nursery Unit.
The Sensor Pad Indicator
Light on the Nursery Unit
will flash quickly in green
(indicates Nursery Unit is in
linking mode).
GREEN
5
6
4) Turn the Parent Unit ON. The Out‑of‑range icon
will blink (indicates Nursery Unit is in linking
mode).
5) Press and hold the Talk Back button on the
Parent Unit until a beep tone is heard.
6) Press OK button on the Parent Unit. The Out‑of‑
Range icon should blink faster to indicate
that the Parent Unit is in linking mode.
76
256AC_02_manuel_Pabobo_AC117_m3.indd 76 2018-05-30 11:51 AM