Nursery Unit:
When this icon appears, batteries
need to be replaced in the Nursery
Unit.
Out-of-Range:
Indicates the lost of connection
between the Parent Unit and the
Nursery Unit. This icon will also flash
with the channel number on the
Parent Unit screen when in
Channel
selection
mode.
Parent Unit:
This icon will only be on during
Channel Selection
mode.
Temperature Display:
Indicates room temperature
(Displays Celsius, Fahrenheit in USA)
IMPORTANT ICONS
Channel Display:
Indicates selected channel
Sound Level Indicator:
Indicates the sound level on the Parent
Unit.
Battery Level icon:
Indicates battery level
Empty
1/2 Full
Full
Charging
STEP 4 - TESTING AND GETTING TO KNOW YOUR MONITOR
4.1 - OUT OF RANGE FUNCTION
TO ACTIVATE THIS FUNCTION:
Slide switch Up
to be notified when
the Nursery Unit signal
does not reach the Parent Unit.
Your monitor has an
Out-of-Range
function that advises you when your two units
are not communicating.
Out-of-Range
situations can be caused by distance or
by physical interferences.
RANGE:
Open field (Open area without obstructions): up to 820 feet (250 meters).
OUT-OF-RANGE ALARM
• Alarm activates when your two units are not communicating.
• The Parent Unit will emit a double beep every 8 seconds.
•
Out-of-Range
icon will flash on the screen.
IMPORTANT
If the
Out-of-Range
function is activated and you turn the Nursery Unit
OFF
the
Out-of-Range Alarm
will sound. Turn the Nursery Unit
ON
again to reactivate the function.
TO STOP THE OUT-OF-RANGE ALARM:
The
Out-of-Range
will flash
when changing the channel
or if the unit is reconnecting.
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IF YOU HEAR NO SOUND:
• Check that both units are switched on.
• Check that both units are plugged into
functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them as necessary
per unit).
• Bring the Parent Unit closer to the
Nursery Unit.
IMPORTANT
To avoid feedback (whistling),
keep both units at least 10 feet
apart (3 meters).
4.2 - SOUND TRANSMISSION (VOX)
Your Angelcare
®
monitor is equipped with a voice-activated system. The Nursery Unit
will be activated and transmit sounds to the Parent Unit only when it captures sounds.
The sensitivity dial allows controlling the level of sound picked up and transmitted by the
Nursery Unit.
Turn the Parent
Unit
OFF
OR
Turn the Nursery
Unit
ON
13
E
N
12
