ANFIM AE 65 V, Инструкция по эксплуатации

Страница: 21 / 36

21
Solida | EN
Se ng the grinding degree
• The lock for the grinding degree adjuster locks the grinding
degree slider to prevent accidental adjustment of the grind-
ing degree.
• When the grinding degree lock is open, the grinding degree
slide can be moved con nuously along the grinding degree
scale.
The
fi nest se ng is “0” and the coarsest se ng is “8”.
1. If necessary, release the lock on the grinding degree adjuster by rota ng
the grinding degree lock (4) counterclockwise to the posi on (open)
(see Fig. H ).
2. Move the grinding degree slide (12) to the posi on required so that the
groove on the slider shows the grinding degree required on the grinding
degree scale
(21) (see Fig. I ).
• Reduce the grinding degree only while the grinder is in
opera on.
• In order to avoid/eliminate imbalances in se ng the grind-
ing degree, it is advisable fi rst to set a coarser grinding
degree (about one level/unit above the grinding degree
required) and only then move the grinding degree slide
down from there to the
fi ner grinding degree required.
3. Fix the grinding degree se ng as necessary by turning the grinding
degree lock clockwise to the posi on (closed) (see Fig. H ).
Grinding espresso beans
1. Start the grinding process by moving the start bu on (8) to posi on I.
Grinding starts and the grounds fall into the dispensing chamber (3) .
2. Set the start bu on to posi on 0 to end the grinding process.
Grinder variants with “Automa c Filling” func on:
With the grinder switched on (start bu on in posi on I), the
grinding process stops automa cally as soon as the capacity of
the dispensing chamber is reached, and it starts again when the
level of co
ff ee grounds falls as they are dispensed.