AneX L/type, Руководство по обслуживанию

Страница: 8 / 200

8
EN
the carrycot, press the adapter buttons and
lift the carrycot out (Fig. 14). The inside part of
the carrycot can be removed and washed if nec-
essary. Remove the mattress and the textile by
unbuttoning all the Velcro (Fig. 15). Ventilation
is also provided on the carrycot. Unzip the lock
in the front part of the carrycot and bend out
the valve made of fabric (Fig. 16).
Carrycot hood, carrycot cover
The carrycot is equipped with a comfortable
and sophisticated hood, which protects the
child from natural phenomena (wind, sun,
snow, rain). Positions of the carrycot’s hood
are adjustable using buttons. Push both
buttons simultaneously and lower the hood
(Fig. 17). To open the hood, pull it until it locks
in position. The hood is also equipped with
an additional valve, so unzip the hood and
lower it as much as possible. The carrycot has
an additional transport handle (Fig. 18). The
carrycot also has a leg cover, which is fastened
with magnets and buttons (Fig. 19). The carrycot
hood is also ventilated, lift the fabric valve
with the leather tag and fix it in this position
(Fig. 20). The carrycot is also equipped with an
anti-mosquito net (Fig. 21) and a raincoat
(Fig. 22), suitable for both the carrycot and the
stroller seat. To fix the raincoat to the carrycot,
put it on and fasten the buttons on both sides
of the carrycot around the adapters (Fig. 23).
Seat unit
To mount the stroller unit, place its adapters
in the adapter compartments inside the frame
(Fig. 24). Adapters of the stroller unit are locked
automatically. Two possible seating positions
are available: facing the direction of movement
and child facing the mum. It is also possible
to remove the fabric part of the seat and wash
it. For this purpose, you must disconnect the
fabric set from the plastic base. First, release
4 clips from the bottom of the seat (Fig. 25).
The top of the fabric is wrapped in plastic that
can be easily removed (Fig. 26). The next step
is to remove the seat belts from the outside
of the seat by pulling the clips through the
holes (Fig. 27). Pull up the handle in the seat
to detach the stroller seat from the frame
(Fig. 28). The back of the seat can be tilted us-
ing the handle at the back of the seat (Fig. 29).
Seat unit hood, foot cover
The stroller block is equipped with a comforta-
ble hood that protects the child from wind, sun,
snow, and rain. The position of the hood is ad-
justed by pressing the top of the hood (Fig. 30).
The hood of the stroller seat is ventilated; twist
the valve on top, and lock it in position (Fig. 31).
The hood is also equipped with an additional
valve, so that it protects the child even more.
Unzip the zipper on the hood and lower it as
low as much possible to the typical fixation
sound (Fig. 32). There is also a foot cover on
the seat of the stroller unit, fitted under the
bumper, and fixed to the inner seat side with
buttons (Fig. 33).
Footrest adjustment
To lower the footrest, simultaneously press the
buttons on both sides of the footrest and adjust
to the required height (Fig. 34). The footrest can
be lifted without pushing any buttons.
Seat unit’s security bumper
The bumper on the stroller block prevents the
child from falling out of the stroller. To mount
the bumper, insert it into the holes on both