9
device back. This action will open the bottom of the dust receiver tank,
which will release its contents into the bin.
Note if the dust receiver tank is very full, it is recommended that a bag
be pulled over the tank so that the tank can be emptied into the bag
first. This avoids excessive dust being released.
Once the tank is empty it is recommended that the mesh filter
and HEPA filter be cleaned if necessary.
Pull and rotate the filter grille on the back of the dust tank until
you see the HEPA filter.
Carefully turn the HEPA filter in anti-clockwise direction, until it
disengages. Now remove the HEPA filter.
