■
Set up / How to use
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or property
damage.
●
When it turned the steering of the tip to the removal direction after the tip was clogged up with clog,
●
Paint may spout out by pressure left for the tip.
It is very dangerous, when paint and a solvent are in the direct body from eyes and a mouth and skin.
●
Attach the tip and the hand guard surely. There is danger to become the serious injury including the injury by the paint leak.
Job.
１
Insert seal
(2)
and gasket
(3)
in hand guard
（
4
）
.
See the drawing right
for inserting sea and gasket.
Job.2
Insert tip
(1) in hand guard (4).
Job.3
Confirm a tip installation state.
When tip can be turned 180 degrees.
→
ＯＫ
Job.4
Confirm a direction of spray and
a direction of removing clog
.
Job.5
Fix hand guard
(4)
to airless gun.
■
Adjustment of pattern width
Problems
cause
treatment
Wrong pattern shape
Wrong position of the tip
Attach a tip to the gun horizontally
Insert the tip to the end of the hand guard
Manual No.１６４５－０３
Code No.０４５０１０００
How to attach
How to remove
Removing clog
Spray
Seal 、Gasket
１
３
４
Attach / Remove (Seal and gasket )
Installation direction of the tip
1. Tip
2. Seal
3. Gasket
4. Hand guard
２
3176,Shinyoshida-cho, Kohoku-Ku,
Yokohama 223-8501, Japan
