How to connect
Use clean air filtered through air dryer and air filter.
Before using the spray gun for the first time, clean fluid passages with thinner to remove rust preventive oil.
Firmly connect hose or cup to spray gun.
.
Maintenance and inspection
First release air and pressure fully according to item No. 3 of Improper use of equipment of WARNING on page 2.
Only an experienced person who is fully knowledgeable of the equipment should perform maintenance and inspection.
Use neutral cleaner:pH value shall be 6 to 8, otherwise could cause corrosion.
Only use genuine ANEST IWATA parts for any maintenance or repairs.
Step-by-step procedure
Where to inspect
Parts replacement standard