1
INSTRUCTION MANUAL
W400 WB SPRAY GUN
PL Before commencement of work thoroughly read this
manual and its instructions, including those regarding
safety of work, and strictly observe them.
IMPORTANT
The spray gun should be operated by a trained worker. Any use and/or servicing not in compliance with this manual will
INVALIDATE THE WARRANTY. Read these instructions before using the spray gun.
SPECIFICATIONS
Max. working pressure: 6.8 bar (98 PSI) Paint tank terminal: M16 x 1.5mm Emitted noise level (LAeqT) 74.5 dB (A)
Temperature range: 5~40
°
C
Air inlet terminal: G 1/4”
Model
Nozzle
diameter
mm (in)
Air
pressure
bar (PSI)
Lacquer
output
ml/min
Air
consumption
l/min (cfm)
Jet width
mm (in)
Head
Weight
g (lbs)
High T.E.C. W400 WB
W400WB-101G
1.0 (0.039)
1.8 (26)
90
230 (8.1)
230 (9.1)
WB1
380 (0.84)
W400WB-121G
1.2 (0.047)
120
260 (10.2)
W400WB-141G
1.4 (0.055)
160
290 (11.4)
W400WB-132G
1.3 (0.051)
140
390 (13.7)
300 (11.8)
WB2
W400WB-162G
1.6 (0.060)
210
390 (13.7)
300 (11.8)
WB2
Nozzle
Needle
Diameter
Type
Type
mm
1.0 (0.039)
200WB/10
40012
1.2 (0.047)
400WB/12
40012
1.4 (0.055)
400WB/14
20015
ATTENTION
Spare parts list is provided on page 3.
Manufactured by:
ANEST IWATA Corporation
1-9-14, Ebisuminami, Shibuya-ku, Tokyo, Japan