6
Safety precautions
1. Spark and open flames are strictly prohibited.
Paints can be highly lammable and can cause ire.
Avoid any ignition sources such as smoking, open lames, electrical goods, etc.
2. In case of FCV-31 , never use the following HALGOGENATED HYDROCARBON SOLVENTS.
In case of FCV-31N , pay attention that it’s exterior does not come into contact with the
following
Halogenated hydrocarbon solvents.
which can cause cracks or dissolution on gun body (aluminum) by chemical reaction.
unsuitable solvents
：
methyl chloride, dichloromethane, 1.2-dichloroethane,carbon tetrachloride,
trichloroethylene, 1.1.1-trichloroethane
（
Be sure that all luids and solvents are compatible with gun parts.
We are ready to supply a material list used in the product
）
3. Securely ground flow control valve, connecting to grounded pump or grounded fluid pipelines or grounded metal bracket.
Ground wire
:
Less than
１
M
Ω
. Check the earth stability periodically.
I not, insu icient grounding can cause ire and explosion due to static electric sparking.
Wrong operation o equipment
1. Before operation, confirm that each section is properly fitted and adjusted.
Install the pressure relie valve in connected piping route to let the paints pressure relie in the emergency.
2. Never spray toward people or animal.
I done, it can cause in lammation o eyes and skin or bodily injury.
3. Never exceed maximum operating pressure and maximum operating Temperature.
In the air supply line, control proper pressure by setting up the air pressure gauge.
4. Securely connect it to fluid hose and pump to avoid leakage and looseness.
I not, hazardous hose movement and paint ejection can cause severe bodily injury.
I you are injured, see a doctor immediately without regard to the degree o injury.
5. Be sure to use at lower than max. primary pressure.
Use at higher than max. primary pressure can cause damage which is very dangerous.
6. Be sure to use fluid hose which withstand Max. primary pressure working pressure 2.5MPa.
When the deadline o the liquid by the contact o the ball and the seat becomes de ective, there is a case the secondary pressure rises to the primary pressure.
Please remedies repair re erring to the paragraph o the problem and the remedies.
1
．
Use in a well-ventilated place to avoid serious injury caused by paints or solvents .
I not, poor ventilation can cause organic solvent poisoning and catch ire.
2. Be sure to reduce fluid pressure and air pressure down to 0MPa before cleaning,
disassembling or servicing.
I not, remaining pressure can cause bodily injury through ejection o cleaning liquid due to wrong operation.
3
．
During painting, disassembling or servicing, be sure to wear protective cover such as glasses, masks or gloves.
I not, cleaning liquid, etc., can cause in lammation o eyes and skin.
I you eel something wrong with eyes or skin, immediately see a doctor.
1
．
Never alter this equipment.
I done, it can cause insu icient per ormance and ailure.
2
．
Never use it for foods or chemicals.
I done, it can cause accident by corrosion in paint passages and oreign matter can cause health problems.
3
．
If something goes wrong, immediately stop operation and find the cause. Do not use again until you have solved the problem.
4
．
Never use commercial or other parts instead of ANEST IWATA original spare parts.
Protection o human body
Fire and explosion
Other Precautions
