Anest Iwata Eclipse HP-BCS, Руководство по эксплуатации

Страница: 10 / 16

Cleaning the Needle
1. Unscrew the handle (#19) from the airbrush body.
2. Loosen the needle chucking nut (#18).
3. Gently pull the needle (#17) straight out.
4. Fold a soft cloth damp with cleaner over the needle.
5. Rotate the needle to gently wipe the residual paint off.
6. Carefully insert the needle into the airbrush until it seats
fully against the nozzle (#4).
The most probable time to damage the needle is when the
needle passes through the main lever (#12) and through the
needle packing screw (#14b).
If the needle stops abruptly, retract and examine the trigger
mechanism for proper assembly and re-insert the needle.
7. Tighten the needle chucking nut finger tight. Pull the main
lever back and forth to visually confirm the needle’s ability
to move.
8. Screw the handle back onto the airbrush body.
Periodically
To ensure smooth main lever action, lubricate the needle
(#17) and the main lever mechanism (#12) regularly.
1. Unscrew the handle (#19).
2. Loosen the needle chucking nut (#18).
3. Remove the needle.
4. Coat the needle lightly with a high-quality lubricant,
like Iwata Lube.
5. Wipe the needle with a soft, clean cloth, leaving a light coat
of lube behind.
6. Re-insert the needle gently into the airbrush.
7. Tighten the needle chucking nut.
8. Screw the handle onto the airbrush body.
Drip one drop of lube into the slot directly behind the main
lever and as close to the main lever as possible.
10
CAUTION
WARNING
DO NOT over-lube the needle; transferring excess lube into the
nozzle may cause severe paint flow problems.
DO NOT use light machine oil or WD-40 for lubrication. These lubes
cause the needle to stick when it moves through the needle
packing and can also get into the air system.
If it becomes absolutely necessary to dismantle the airbrush
remember that most situations, unless otherwise directed, do
not require tools.
CAUTION
WARNING