TEST
Anern Industry Group Limited
h
The working voltage is AC90-305V. Please ensure the voltage when connected the power supply. The
light would be destroyed permanently if connected with higher voltage.
h
After connecting with the power supply, no contact between the relative metal and the light base to
prevent electric shock.
h
After unwrapping the package or before using it, please check whether it is destroyed due to
transportation.
h
If there is any damage, please stop using it and inform supplier. The product only could be used under
intact conditions.
h
To ensure the product could be used normally, please strictly follow the introduction and attentions. The
supplier shall not be responsible due to any of the damage caused by illegal operation.
h
Please don’t connect the LED street light and power supply in high temperature condition. The lifespan
would be shorter when it is employed under the higher temperature. Please also maintain the street lights
with water washing periodically for better heat dissipations.
h
Before installing, please ensure the environment is suitable and it is recommended that it should be
installed on stable place in case of vibration.
h
Due to the temperature of the lamp’s surface could reach to 50
, it is recommended that there is no
devices which is sensitive to heat. To ensure the suitable working temperature, please keep it from heat
resources!
Web: anerngroup.com | Email: [email protected] | WhatsApp: +86 13570048098